PSE-630/1 - S AUTOMATIC CUTTING AND PACKING MACHINE


COMPOSITION
  • One coil of paper units;
  • Cutting unit;
  • Output mat and vibrating table;
  • Packaging system for A4 reams – (500 sheets - 75g/m²).

TECHNICAL CHARACTERISTICS OF THE CUTTING SYSTEM

COIL OF PAPER UNIT
  • One coil of paper unit;
  • Coil feeder with pneumatic arms;
  • Constant paper tension through load cell with microprocessed automatic control;
  • Automatic marking device ;
  • Pneumatic brake with digital controller;
  • Single tensioner for each coil;
  • Produces 3 reams of 500 sheets in less than 60.

CUTTING UNIT
  • Scissors cutting system with knife and counter-knife;
  • Does not produce burrs on cut sheet;
  • Static eliminator set consisting of 1 bar;
  • Four rotary cutting discs for lateral reflow removal and coil opening 630mm to 210mm;
  • Cut sheets A3 - A4 - A5 - Craft 2 - Craft 9 -Letter.

OUTBOARD AND VIBRATING TABLE
  • Paper conveyor belt with constant segment;
  • Dispensing wheels for scale formation;
  • Electro-pneumatic system for ream separation;
  • Three-ream forming vibrating table simultaneously;
  • Automatic ream removal system for conveyor belt.

TECHNICAL DATA
  • Maximum paper width: 640 mm;
  • Maximum coil diameter: 1200 mm;
  • Grammage: 50 a 120g/m²;
  • Various types of substrates;
  • Main drive with AC motor with 7,5 CV;
  • Pneumatic supply with pressure of 6,0 kgf;
  • Digital counter with inductive sensor;
  • Electronic protection system;
  • Maximum speed: 180 m/minute;
  • General control system via PLC.

TECHNICAL CHARACTERISTICS OF THE PACKAGING SYSTEM FOR RESTROOMS A4 - 500 SHEETS

SYSTEM PACHAGING
  • Automatic ream feeding system (500 sheets - 75g/m²);
  • Packing speed: 5 seconds / ream;
  • Glue through applicator nozzle, with electro-pneumatic drive and tank for 4.5kg of glue;
  • Uncoiling and cutting the cover, by knife and counter-knife controlled by optical sensor on the mark in the register;
  • Folding and packaging, with three fold stages, driven by electro-pneumatic control;
  • Aluminum frame construction and anti-corrosion treatment parts;
  • 12 sensors for controlling and confirming commands.

TECHNICAL DATA
  • Three-phase power supply;
  • Max. Consumption 10 amp;
  • Pneumatic power supply 6kgf;
  • Maximum coil diameter cover 600mm;
  • Maximum coil width layer 385mm;
  • Recommended grammage of sheets 75g/m²;
  • Adhesive application temperature 160°C a 180°C;
  • General control system via PLC.

MACHINE DIMENSIONS:
  • Height: 1,5m;
  • Length: 4,5m;
  • Width: 4,2m;
  • Weight : ~ 3400kg.